Author Topic: Control4 Driver  (Read 1557 times)

0 Members and 1 Guest are viewing this topic.

Offline rdenghel

  • Administrator
  • Expert
  • *****
  • Posts: 309
Control4 Driver
« on: February 25, 2010, 11:08:42 AM »
Credit for this driver goes to Andre' Lawton of magicalhometheaters.com. He writes:

Romeo,
   Attached you will find a C4 driver please note this driver is to be viewed as a PS3 when it is added in composer, also note the programmer who ever he/she is will have to modify it to do exactly what they want ( example: eject button on a C4 remote does not exist so they would have to use one of the other buttons on the remote and program it that way.)

Thank you very much, Andre'!

Romeo Denghel
Schmartz, Inc.

Offline ceschwaller

  • Newbie
  • *
  • Posts: 1
Re: Control4 Driver
« Reply #1 on: March 10, 2010, 11:33:54 AM »
this says 1000 does it work the same with the 500

Offline rdenghel

  • Administrator
  • Expert
  • *****
  • Posts: 309
Re: Control4 Driver
« Reply #2 on: March 10, 2010, 02:38:00 PM »
The codes are the same for our entire family of products.

Romeo Denghel
Schmartz, Inc.

Offline transepoch

  • Newbie
  • *
  • Posts: 1
Re: Control4 Driver
« Reply #3 on: August 11, 2010, 02:58:41 AM »
Dang.  Wish I had hit the forum before taking the 5-minutes to copy/paste everything over into a new driver.

As I am only using the SR-250 and not a touchpad (where pretty icons could be added) the mapping was fun.  Something along the lines of REC=PS button (both round,) DVR=eject, and */# were angle/subtitle toggles.  The codes all work great, and the PS3IR keeps everything moving smoothly.  Now to find some way of getting the HDCP handshakes to be as consistent, so I can actually watch movies.

Offline Ranger620

  • Newbie
  • *
  • Posts: 1
Re: Control4 Driver
« Reply #4 on: September 28, 2010, 05:16:06 PM »
Just wanted to say thank you for the driver.  It worked first time perfectly!

THANK YOU!