Author Topic: RTI - IR/Logic  (Read 885 times)

0 Members and 1 Guest are viewing this topic.

Offline swopez

  • Newbie
  • *
  • Posts: 1
RTI - IR/Logic
« on: May 24, 2008, 08:16:33 AM »
I was able to successfully create a IR driver with the hex ir commands found on this forum.   

The commands work great and was able to test most of them.  Although RTI's Library includes a PS2 in its database this one is relabeled to the correct names for PS3.

-Off macro notes-

I created a new IR command named (PS-OFF?).  After many tries to get the OFF screen to pull up.  I found that setting the PS command to 25 repeats and delselecting sustain in the library manger was the ticket.  So I added the second PS command into the library file.  As for the macro I didn't need any delays just the standard .3 default for every command is fine.

Here is the off macro sequence that worked.

-PS-OFF?
-X
-X

Thats it.

I used a flag to track the power status of the PS3.  I am not sure if the new command will turn on the PS3 if its off but I sure it will.

I am including the IR library file.   




Offline MMuecke

  • Administrator
  • Expert
  • *****
  • Posts: 293
Re: RTI - IR/Logic
« Reply #1 on: May 29, 2008, 01:44:09 PM »
Thanks for posting your results!